D-LINK Wireless Router Dual Band AX1500 Wi-Fi 6 1xWAN(1000Mbps) + 3xLAN(1000Mbps), DIR-X1530/EE DIR-X1530/EE

• RTL8198D (900MHz)

• 256MB, DDR3, built in processor

• 128MB, SPI NAND

• 10/100/1000BASE-T WAN port

• 3 10/100/1000BASE-T LAN ports

• Power

• Internet

• WLAN 2.4G

• WLAN 5G

• WPS button to connect mesh network devices, set up wireless connection, and enable/disable wireless network

• Four external non-detachable antennas (5dBi gain)

• 2 x 2, MU-MIMO

• Power input connector (DC)

• PPPoE

• IPv6 PPPoE

• PPPoE Dual Stack

• Static IPv4 / Dynamic IPv4

• Static IPv6 / Dynamic IPv6

• PPPoE + Static IP (PPPoE Dual Access)

• PPPoE + Dynamic IP (PPPoE Dual Access)

• PPTP/L2TP + Static IP

• PPTP/L2TP + Dynamic IP

• IPIP6 in DSLite mode

• 6in4

• 6to4

• 6rd

• DHCP server/relay

• Advanced configuration of built-in DHCP server

• Stateful/Stateless mode for IPv6 address assignment, IPv6 prefix delegation

• Automatic obtainment of LAN IP address (for access point/repeater/client modes)

• DNS relay

• Dynamic DNS

• Static IPv4/IPv6 routing

• IGMP Proxy

• RIP

• Support of UPnP

• Support of VLAN

• WAN ping respond

• Support of SIP ALG

• Support of RTSP

• WAN failover

• LAN/WAN conversion

• Autonegotiation of speed, duplex mode, and flow control / Manual speed and duplex mode setup for each Ethernet port

• Built-in UDPXY application

• Port mirroring

• Network Address Translation (NAT)

• Stateful Packet Inspection (SPI)

• IPv4/IPv6 filter

• MAC filter

• URL filter

• Ad blocking function

• DMZ

• Virtual servers

• Built-in SkyDNS web content filtering service

• IPsec/PPTP/L2TP/PPPoE pass-through

• PPTP/L2TP servers

• PPTP/L2TP tunnels

• L2TP over IPsec client

• GRE/EoGRE/EoIP/IPIP tunnels

• IPsec tunnels

– Transport/Tunnel mode

– IKEv1/IKEv2 support

– DES encryption

– NAT Traversal

– Support of DPD (Keep-alive for VPN tunnels)

• Local and remote access to settings through SSH/TELNET/WEB (HTTP/HTTPS)

• Bilingual web-based interface for configuration and management (Russian/English)

• Support of D-Link Assistant application for Android and iPhone smartphones

• Notification on connection problems and auto redirect to settings

• Firmware update via web-based interface

• Automatic notification on new firmware version

• Saving/restoring configuration to/from file

• Support of logging to remote host

• Automatic synchronization of system time with NTP server and manual time/date setup

• Ping utility

• Traceroute utility

• TR-069 client

• Schedules for rules and settings of firewall, automatic reboot, and enabling/disabling wireless network and Wi-Fi filter

• Automatic upload of configuration file from ISP’s server (Auto Provision)

• Configuration of action for hardware buttons

• IEEE 802.11ax

• IEEE 802.11ac Wave 2

• IEEE 802.11a/b/g/n

• IEEE 802.11w

Frequency range

The frequency range depends upon the radio frequency regulations applied in your country

• 2400 ~ 2483.5MHz

• 5150 ~ 5350MHz

• 5650 ~ 5850MHz

• WEP

• WPA/WPA2 (Personal/Enterprise)

• WPA3 (Personal)

• ??? filter

• WPS (PBC/PIN)

• Support of client mode

• WMM (Wi-Fi QoS)

• Information on connected Wi-Fi clients

• Advanced settings

• Guest Wi-Fi / support of MBSSID

• Limitation of wireless network rate

• Periodic scan of channels, automatic switch to least loaded channel

• Support of 5GHz TX Beamforming

• Autonegotiation of channel bandwidth in accordance with environment conditions (20/40 Coexistence)

• CoovaChilli authentication portal

• Support of OFDMA technology

• Support of TWT technology

• IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54Mbps

• IEEE 802.11b: 1, 2, 5.5, and 11Mbps

• IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, and 54Mbps

• IEEE 802.11n (2.4GHz/5GHz): from 6.5 to 300Mbps (MCS0–MCS15)

• IEEE 802.11ac (5GHz): from 6.5 to 867Mbps

• IEEE 802.11ax (5GHz): from 6.5 to 1201Mbps

Transmitter output power

The maximum value of the transmitter output power depends upon the radio frequency regulations applied in your country

• 802.11a (typical at room temperature 25 °C)

15dBm at 6, 9, 12, 18, 24, 36, 48, 54Mbps

• 802.11b (typical at room temperature 25 °C)

15dBm at 1, 2, 5.5, 11Mbps

• 802.11g (typical at room temperature 25 °C)

15dBm at 6, 9, 12, 18, 24, 36, 48, 54Mbps

• 802.11n (typical at room temperature 25 °C)

2.4GHz, HT20

15dBm at MCS0/8~7/15

2.4GHz, HT40

15dBm at MCS0/8~7/15

5GHz, HT20

15dBm at MCS0/8~7/15

5GHz, HT40

15dBm at MCS0/8~7/15

• 802.11ac (typical at room temperature 25 °C)

VHT20

15dBm at MCS0~8

VHT40

15dBm at MCS0~9

VHT80

15dBm at MCS0~9

• 802.11ax (typical at room temperature 25 °C)

15dBm at MCS10

15dBm at MCS11

Receiver sensitivity

• 802.11a (typical at PER < 10% (1000-byte PDUs) at room temperature 25 °C)

-94dBm at 6Mbps

-76dBm at 54Mbps

• 802.11b (typical at PER = 8% (1000-byte PDUs) at room temperature 25 °C)

-96dBm at 1Mbps

-89dBm at 11Mbps

• 802.11g (typical at PER < 10% (1000-byte PDUs) at room temperature 25 °C)

-92dBm at 6Mbps

-72dBm at 54Mbps

• 802.11n (typical at PER = 10% (1000-byte PDUs) at room temperature 25 °C)

2.4GHz, HT20

-91dBm at MCS0/8

-72dBm at MCS7/15

2.4GHz, HT40

-90dBm at MCS0/8

-71dBm at MCS7/15

5GHz, HT20

-93dBm at MCS0/8

-74dBm at MCS7/15

5GHz, HT40

-90dBm at MCS0/8

-71dBm at MCS7/15

• 802.11ac (typical at PER = 10% (1000-byte PDUs) at room temperature 25 °C)

VHT20

-93dBm at MCS0

-68dBm at MCS8

VHT40

-90dBm at MCS0

-63dBm at MCS9

VHT80

-87dBm at MCS0

-60dBm at MCS9

• 802.11ax (typical at PER = 10% (1000-byte PDUs) at room temperature 25 °C)

HE20

-90dBm at MCS0

-65dBm at MCS11

HE40

-87dBm at MCS0

-62dBm at MCS11

HE80

-84dBm at MCS0

-59dBm at MCS11

• 194 x 139 x 55 mm (7.64 x 5.47 x 2.17 in)

• Output: 12V DC, 1A

• Operating: from 0 to 40 °C

• Storage: from -20 to 65 °C

• Operating: from 10% to 90% (non-condensing)

• Storage: from 5% to 95% (non-condensing)

• Router DIR-X1530

• Power adapter DC 12V/1A

• Ethernet cable

• “Quick Installation Guide” (brochure)